Plz contact us for availability!


  • Single row Eurorack module space (3U) with additional 1U row along the top for mounting all sorts of essential utility modules.
  • Super strong extruded aluminum design
  • Highly resilient surface finish that has been anodized and sandblasted
  • Threaded inserts allow for modules to be mounted with standard M3 screws, no sliding nuts!
  • Pairs of slots run along the three sides of the case. Each slot is sized to allow for M3 nuts or M3 Hex Head bolts to slide in the space. Perfect for attaching all sorts of interesting accessories and linking together multiple cases (both coming soon!)
  • A pair of custom extruded rubber “feet” come fitted on the bottom slots of the case. This rubber can be slid out when you remove an end cheek and then positioned on the front side of the case so that you can stand the cases vertically.
  • Power supply is mounted to a pair of inside bottom rails and can be re-positioned by loosening the fastening nuts and sliding the whole assembly left or right.
  • Options to mount power entry and switch on the side cheek or in a 1U panel (optional extra cheeks without switch/jack holes are available)
  • All three sizes of cases come with our high wattage, low noise, star power TPS series powered busboards and Meanwell AC/DC adapters.

4U x 42HP  with TPS30W MINI and Meanwell 40W PSU


4U x 84HP with TPS30W MAX and Meanwell 40W PSU


4U x 104HP with TPS30W MAX and Meanwell 60W PSU



Max. internal depth for modules: 70 mm
Internal depth for modules above the highest point of the power bus board:  53 mm

42 HP

  • outside dimensions:  177.4 mm x 81.3 mm x 218.3 mm
  • weight:  1.2 kg
  • power: TPS30 MINI +12V output at 1.2A, -12V output at 1.2A, +5V output at 500mA

84 HP

  • outside dimensions: 177.4 mm x 81.3 mm x 435.6 mm
  • weight: 2.1 kg
  • power: TPS30 MAX +12V output at 1.5A, -12V output at 1.5A, +5V output at 1A

104 HP

  • outside dimensions: 177.4 mm x 81.3 mm x 537.3 mm
  • weight: 2.6 kg
  • power: TPS30 MAX +12V output at 1.5A, -12V output at 1.5A, +5V output at 1A




4U Rack ears

  • Easily screw into the side of your case with the pre-existing holes
  • Allows you to mount your 84HP case in standard 19″ rack systems


  • Plain sidecheek without holes for DC jack or power switch
  • Use this when mounting power entry via the 1U section or back of the case


  • One set of joiners allows up to 3 cases to be linked and stacked together



Current Stock:


No Reviews Write a Review