$619.00

Plz contact us for availability!

(modules in pictures not included...)

Features

  • Two 84 hp rows (6U) of Eurorack module space.
  • One 84 hp row for our 1U modules.
  • Threaded M3 strips for mounting modules.
  • High spec TPS80 power supply capable of powering up to 20 modules with +12 V output at 3000 mA, -12 V output at 3000 mA and +5 V output at 1500 mA

Construction:

  • Solid plastic carrying handle.
  • Detachable nylon carrying strap.
  • Anodized aluminum lid with latches, deep enough to close the case with cables patched in.
  • Retractable feet that can support the case at two different angles. Or lay the case flat on a table.
  • Plastic feet for resting the case on the table.
  • Rubber feet on bottom side of lid so the case can stand vertically with the lid attached.
  • Spring-loaded latching accessory slots on top and bottom of the case. The slots can be used to attach two cases together and for the carrying strap.

Rear panel:

  • Four 1/4″ audio jacks that can be connected to the Audio I/O 1U. Two ins and two outs.
  • MIDI In, Out, and Thru jacks. The In jack can be connected to the µMIDI 1U and will pass to the Thru. The Out is for future expansion.
  • USB port that connects to the µMIDI 1U and other future modules.
  • Rocker switch and barrel plug for power entry.

 

 

Max. internal depth for modules: 70 mm
Internal depth for modules above the highest point of the power bus board:  53 mm

  • Outside dimensions with lid:  312 mm x 165 mm x 445 mm
  • Outside dimensions without lid: 312 mm x 83 mm x 445 mm
  • Weight: 3.8 kg with lid, 4.3 kg with lid and power adapter
  • Power: TPS80 +12 V output at 3000 mA, -12 V output at 3000 mA, +5 V output at 1500 mA
Current Stock:

No Reviews Write a Review